TECHNIAHQROBOT / INDEPENDENT ROBOTICS REPORTINGENGLISH EDITION / 12 November 2026
ROBOTICS / OPEN PROJECTRobotic Arms

BCN3D Moveo: STL Parts, Assembly Manual and Arduino Control

Moveo is a 3D-printed educational arm developed by BCN3D with the Catalan education department. Its source repository separates mechanical CAD, print meshes, firmware, the bill of materials and an illustrated manual. The original project is historical; the repository does not establish modern software compatibility.

Editorial source check · Project documentation and public files; no physical test claimedRevision and parts availability may change
THE TECHNICAL DOSSIERBCN3D Moveo

What the downloadable package actually contains

The official repository separates CAD files from STLs. CAD is intended for editing the mechanism; the STL directory supplies meshes for fabrication. The BOM and user manual cover purchased hardware and the build order.

The firmware folder contains a customized Marlin build. Its presence establishes a control implementation for the documented machine revision, not compatibility with a random controller board.

Choosing prints and mechanical parts

Check the print orientation, supports and mating dimensions described for your selected revision. Dry-fit the links, bearing pockets and fasteners before routing cables or fixing servo horns. Parts printed with different shrinkage settings may bind.

Do not price only the filament. Motors, gears, bearings, wiring, control electronics and post-print finishing remain separate from the STL download.

First power-up and control limits

Finish wiring with power disconnected, identify each motor channel and test one axis at a time. Keep the workspace clear while checking travel directions and end positions.

Moveo was published for educational reproduction. Its repository does not publish a contemporary ISO-qualified collaborative safety assessment or a universal payload specification.

02 / FABRICATION AND ASSEMBLY

BCN3D Moveo printed links and Marlin firmware

Use matching revisions of parts, firmware and instructions. These steps summarize project documentation; no physical build was performed for this article.

Assembly sequence 5 steps

  1. Choose one revision

    Download the manual, matching STL set and BOM together; check that every printed link has the required purchased bearings and fixings.

    Manufacturer's instructions ↗
  2. Print and check fit

    Print the mechanical parts and test bearing seats and clearance before pressing parts together or installing motors.

    Manufacturer's instructions ↗
  3. Build the arm

    Assemble the base and the remaining axes in the order illustrated by the original manual, keeping the cable paths free.

    Manufacturer's instructions ↗
  4. Connect electronics

    Follow the original controller pinout and firmware configuration; inspect polarity and grounding before power-up.

    Manufacturer's instructions ↗
  5. Test one joint at a time

    Run slow direction and limit checks without a payload, then verify the full arm workspace.

    Manufacturer's instructions ↗
03 / PRACTICAL QUESTIONS

STL archives, BOM and joint calibration

Answers are based on published source material and project documentation. Their order does not represent search volume.

01Are the STL files enough to build a Moveo?

No. The repository also lists motors, bearings, electronic boards and fasteners in its BOM. The STL directory covers printed geometry rather than a complete kit.

Sources Official project documentation ↗

02Where is the assembly guide?

Open the USER MANUAL directory in BCN3D's repository. Use its assembly and tuning instructions with the same revision of CAD and firmware.

Sources Official project documentation ↗

03Can I modify the mechanical dimensions?

The editable CAD files are published next to the STLs. Re-check bearings, gear engagement and the workspace after any change.

Sources Official project documentation ↗

04Can I run the latest stock Marlin?

The project supplies its own Marlin-based firmware. Stock versions may have different pin mappings, motion assumptions or command support; a drop-in replacement is not documented.

Sources Official project documentation ↗

05Does the project provide a current total build price?

The upstream BOM identifies components but does not verify a current global purchase total. Quote the listed parts and shipping for your region.

Sources Official project documentation ↗

04 / ENGINEERING NOTES

What to check before building BCN3D Moveo

Build and integration

Match the STL folder to the assembly document. Print the mechanical links, source bearings, motors and hardware from the BOM, assemble each axis in sequence, wire the controller and upload the bundled Marlin-based firmware. Confirm motor direction and travel at low speed before attaching a payload.

Known constraints

The repository preserves an older education platform and its original toolchain. A complete new purchase estimate, modern motion-planning stack and independent accuracy test are not supplied. Do not substitute a newer Marlin build without checking board and pin compatibility.

05 / SOURCES

Original documentation

  1. Official source repository
  2. User and assembly manual
  3. Ready-to-print STL parts
  4. Editable design
  5. Bill of materials
  6. Control firmware

Found a changed specification? Submit a correction with its source ↗

← Back to the open-source index