TECHNIAHQROBOT / INDEPENDENT ROBOTICS REPORTINGENGLISH EDITION / 12 November 2026
ROBOTICS / OPEN PROJECTBipedal Robots

Asimov v0: a biped-leg mechanism with an RSU ankle

Menlo Research’s Asimov v0 release covers a pair of humanoid legs rather than a complete upper-body humanoid. The design has 12 driven degrees of freedom, six per leg, with articulated toes and a revolute–spherical–universal ankle mechanism.

Editorial source check · Project documentation and public files; no physical test claimedRevision and parts availability may change
THE TECHNICAL DOSSIERAsimov v0 Biped Legs

Understanding the joint inventory

Each leg has three hip axes, one knee pitch axis and two ankle actuators. The README names the actuators and gives their specified ranges of motion and peak motor torques. It also lists particular Encos motor models by joint family. These numbers describe the selected components and published geometry.

A useful interpretation check is to trace each actuator through the CAD assembly instead of assuming the mechanism is a chain of ordinary one-axis hinges.

The ankle is the distinctive part

An RSU ankle uses a linkage with revolute, spherical and universal joints. Motion from an actuator passes through that geometry before it changes the foot pose. A simulation that substitutes two unconnected rotary hinges may lose mechanical constraints present in the released design.

The articulated toe adds another physical contact feature to the foot. That does not by itself demonstrate better balance or walking performance; contact modeling and controller behavior still need measured tests.

Peak torque and continuous operation

The official table gives different peak torque figures for the hip, knee and ankle actuator families. Peak torque is a short-duration component figure. It does not establish continuous torque under heat, impact loading, foot force or a complete-robot duty cycle.

Before fabrication, review the joint travel ranges, check clearances around the ankle linkage and confirm the hardware release matches the simulation files. Manufacturing tolerances and actuator mounting need examination before loading the leg.

Scope and permission to reuse files

The repository includes a CERN Open Hardware Licence Version 2 Strongly Reciprocal text in LICENSE.txt. It does not establish a separate software permission for code that may be obtained from other sources. Reuse decisions should be made file by file.

Asimov 1 is a separate full-humanoid release with its own CAD, electronics and software. Do not transfer its listed joint counts or assembly costs to v0.

02 / FABRICATION AND ASSEMBLY

Assemble the twelve-actuator Asimov v0 legs

Use matching revisions of parts, firmware and instructions. These steps summarize project documentation; no physical build was performed for this article.

Assembly sequence 5 steps

  1. Confirm this is the two-leg v0 assembly

    The release describes twelve actuated degrees of freedom and an articulated toe, not arms, head or a complete humanoid.

    Manufacturer's instructions ↗
  2. Inspect six joint types per leg

    Review pitch, roll, yaw, knee and two ankle axes with the model's asymmetrical left/right limit table.

    Manufacturer's instructions ↗
  3. Source the specified Encos motor variants

    Check six model numbers from the joint table; do not substitute identical torque ratings across every joint.

    Manufacturer's instructions ↗
  4. Fabricate structural parts to the released design

    Mechanical designs support low-volume manufacturing and MJF fabrication, with additional purchased actuator hardware.

    Manufacturer's instructions ↗
  5. Assemble and check encoder orientations

    Use the CAD to confirm left/right mirrored motor mounting, then verify travel limits with a safely supported leg before applying control.

    Manufacturer's instructions ↗
03 / PRACTICAL QUESTIONS

Joint limits, motor models and fabrication files

Answers are based on published source material and project documentation. Their order does not represent search volume.

01Is Asimov v0 a complete humanoid?

No. It is an open mechanical platform for two biped legs with twelve actuated axes, six per leg. It lacks the full v1 torso, head and arms.

Sources Official project source ↗

02Where are the printable STL and CAD models?

The repository contains a mechanical directory, but the published README emphasizes mechanical models compatible with MJF. Check the precise files and process before assuming a complete FDM STL package.

Sources Official project source ↗

03Why are the left and right knee angle limits different?

The README lists left knee pitch from 0° to +86° and right from -86° to 0°, reflecting the mirrored joint-coordinate conventions.

Sources Official project source ↗

04What actuators are used in the ankles?

The manufacturer specifies EC-A4310-P2-36 for the ankle A and ankle B joints, with peak torque figures of 36 Nm in its table.

Sources Official project source ↗

05Does the 120 Nm hip figure mean continuous torque?

No. The upstream table calls it peak torque for the hip-pitch axis. Thermal and duty-cycle limits require separate motor documentation.

Sources Official project source ↗

06Can the v0 mechanical parts replace Asimov 1 components?

No direct interoperability is documented. The later Asimov 1 includes a new complete 25-actuator body and separate design releases.

Sources Official project source ↗

04 / ENGINEERING NOTES

What to check before building Asimov v0 Biped Legs

Build and integration

Review the mechanical directory and actuator table in the README before sourcing components. Six actuators per leg cover hip, knee and ankle axes; the document specifies particular Encos motors with different torque ratings.

Known constraints

A 12-actuator leg assembly is not a complete humanoid. Motor peak torque does not document continuous or walking performance. Check separate software licenses where applicable.

05 / SOURCES

Original documentation

  1. Official project source
  2. Hardware license and reuse terms
  3. Official project source
  4. Official project source
  5. Simulation models

Found a changed specification? Submit a correction with its source ↗

← Back to the open-source index