TECHNIAHQROBOT / INDEPENDENT ROBOTICS REPORTINGENGLISH EDITION / 12 November 2026
ROBOTICS / OPEN PROJECTHumanoid Robots

ToddlerBot: a humanoid built for learning locomotion and manipulation

ToddlerBot combines a printable humanoid design with a Python research codebase for real-robot control, reinforcement learning and demonstration-based policies. The 2025 platform and the ToddlerBot 2.0 release should be treated as distinct hardware and software versions.

Editorial source check · Project documentation and public files; no physical test claimedRevision and parts availability may change
THE TECHNICAL DOSSIERToddlerBot

A research platform with more than one control task

The group’s 2025 work describes a robot for loco-manipulation: moving the whole body while interacting with objects. Its repository includes low-level control, RL training, diffusion-policy training and deployment tools. That is a broader set of research components than a CAD-only humanoid release.

The January 2026 Locomotion Beyond Feet work adds a multi-skill system combining reference motions, learned policies and a depth-based skill classifier. The repository describes creating reference motions, training separate skills, preparing depth data and assigning checkpoints before running the combined system.

Why version choice affects the hardware

ToddlerBot 2.0 was announced in August 2025. An assembly guide or parts list prepared for 1.0 may have different wiring, actuators or printing instructions. Start from the changelog and BOM for the intended revision, then cross-check the Onshape model and printable files. A downloaded code package is not a mechanical kit.

The project specifies Python 3.10 or newer for its main software, but the chosen policy pipeline has additional framework and compute dependencies. Commands from one published experiment are not evidence that every skill runs on a newly assembled machine.

The commercial-use restriction

The code and documentation use the MIT license. The mechanical design, including Onshape and printable assets, is distributed under CC BY-NC-SA 4.0. That noncommercial condition changes what a company may do with a derivative robot, even when its Python controller is permissively licensed.

What remains to validate on a real build

Before evaluating locomotion, check actuator calibration, battery and power delivery, emergency stop behavior and the documented motion limits. The academic videos establish reported research examples. This article does not claim to reproduce their outcomes.

02 / FABRICATION AND ASSEMBLY

Print plates, PCB ordering and humanoid assembly

Use matching revisions of parts, firmware and instructions. These steps summarize project documentation; no physical build was performed for this article.

Assembly sequence 5 steps

  1. Pick the mechanical release, order PCBs early

    Use the current BOM with its PCB8CH version. The original instructions estimate around ten days for PCB delivery.

    Manufacturer's instructions ↗
  2. Print the documented plate sequence

    The guide describes prearranged print plates and roughly ten hours per plate on its example Bambu X1C; inspect supports and dimensions.

    Manufacturer's instructions ↗
  3. Assemble arms, then mirrored legs

    The official hardware chapter starts with identical arms, followed by mirrored leg assemblies with their matching joint hardware.

    Manufacturer's instructions ↗
  4. Build the head, waist and torso

    Follow the assembly manual through torso step 8, leaving access to install the prepared Jetson and control boards.

    Manufacturer's instructions ↗
  5. Configure compute and complete supported standing test

    Prepare the Jetson before insertion, install PCB and battery, verify servo configuration and use the documented standing test.

    Manufacturer's instructions ↗
03 / PRACTICAL QUESTIONS

Jetson setup, mirrored legs and design rights

Answers are based on published source material and project documentation. Their order does not represent search volume.

01Where can I get ToddlerBot STL or plate files?

The repository's hardware documentation links the 3D-printing chapter, sliced plates and the matching designs. Use one revision for prints and electronics.

Sources Official project source ↗

02Why does the author recommend ordering the PCB first?

The hardware guide reports a typical lead time of about ten days, so builders can print and assemble in parallel while the boards are fabricated.

Sources Official project source ↗

03Are both arms identical?

The manual says left and right arms are identical for the documented revision, while the legs are mirrored. Do not mirror every arm part automatically.

Sources Official project source ↗

04When should I install the Jetson Orin?

The official sequence prepares Jetson software before inserting the module into the torso. Follow the setup guide before closing the frame.

Sources Official project source ↗

05Can I sell modified ToddlerBot hardware under the MIT software license?

No blanket authorization follows from the software license. ToddlerBot CAD and STL design rights are separately CC BY-NC-SA, restricting commercial use.

Sources Official project source ↗

06Does a simulator model establish stable walking on my build?

No. Actuator numbering, calibration, mechanical tolerances and battery voltage must match the intended robot before physical policy deployment.

Sources Official project source ↗

04 / ENGINEERING NOTES

What to check before building ToddlerBot

Build and integration

Start with the project documentation, Onshape design and official bill of materials rather than assuming the Python package is enough to assemble a robot. The control stack covers low-level actuation, reinforcement-learning locomotion and real-robot deployment. Check actuator versions, printed parts and calibration before reusing trained policies.

Known constraints

The MIT software license does not authorize commercial reuse of the mechanical design: the CAD and STL assets use a separate noncommercial Creative Commons license. The research cost estimate is not a supplier quotation; motion policies need matching hardware and safety checks.

05 / SOURCES

Original documentation

  1. Official project source
  2. Stanford research project and 2.0 information
  3. Original 2025 paper
  4. 2026 Locomotion Beyond Feet paper
  5. Official project source
  6. Bill of materials and component variants
  7. 3D-printing resources and plate order
  8. Hardware assembly manual

Found a changed specification? Submit a correction with its source ↗

← Back to the open-source index