TECHNIAHQROBOT / INDEPENDENT ROBOTICS REPORTINGENGLISH EDITION / 12 November 2026
ROBOTICS / OPEN PROJECTHumanoid Robots

K-Bot: what a public-alpha humanoid repository provides

K-Bot is an open humanoid development project from K-Scale Labs. Its maintainers describe the release as public alpha and warn that interfaces may change. The repository uses submodules, so a snapshot of the top-level files alone does not describe a complete, reproducible software and hardware state.

Editorial source check · Project documentation and public files; no physical test claimedRevision and parts availability may change
THE TECHNICAL DOSSIERK-Bot

The published status sets expectations

A public-alpha label is a practical constraint. A wiring change or interface revision may require changes to the controller, robot description and assembly documentation. The project README invites issues and contributions, but it makes no promise that an arbitrary checkout will behave like an established production robot.

The correct starting point is to identify the particular developer kit or mechanical revision you intend to study, then record the top-level commit and each submodule commit. Updating all submodules to the newest master branch can change the combination of files that previously worked together.

Reproducing a working tree

Git submodules are separate repositories with their own histories. To repeat a setup later, save the parent commit and check out the child revisions recorded by that parent. Inspect the setup and hardware instructions in each component before changing motor parameters or power distribution.

This is more useful than quoting a total number of motors from an unrelated K-Bot article: the current public top-level README does not provide a verified full-system actuator and cost breakdown.

There is a license discrepancy

The upstream README describes the software as GPL v3 and hardware as CERN-OHL-S. The checked repository LICENSE file, however, contains the MIT license text; a separate LICENSE-HW file contains CERN-OHL-S-2.0. Those two statements about software rights conflict. Check the exact file and submodule you want to redistribute, and obtain clarification from the maintainer before making a commercial reuse decision.

This discrepancy is left visible rather than resolved by guessing which notice takes precedence.

When to choose K-Bot

It can be useful for studying evolving open humanoid designs and participating in upstream development. A team needing fixed mechanical interfaces, a priced bill of materials and predictable upgrades should verify those requirements against a specific tagged release.

02 / FABRICATION AND ASSEMBLY

K-Bot alpha source, CAD and controller setup

Use matching revisions of parts, firmware and instructions. These steps summarize project documentation; no physical build was performed for this article.

Assembly sequence 5 steps

  1. Read public-alpha status before ordering parts

    The authors warn of breaking changes and have a developing set of mechanical and electronic subprojects.

    Manufacturer's instructions ↗
  2. Clone recursively at one known revision

    Fetch git submodules so mechanical, kos-kbot, ksim-kbot and inference assets match the checked-out root commit.

    Manufacturer's instructions ↗
  3. Inspect mechanical manufacturing assets

    Review the mechanical directory and hardware license before assuming an STL-only package or purchasing a full machine.

    Manufacturer's instructions ↗
  4. Match control electronics to the design release

    Use the electrical directory, confirm power and motor interface details and test boards independently.

    Manufacturer's instructions ↗
  5. Test simulation and low-level software before motion

    Bring up the documented software layers and verify sensor/motor joint mapping before trying to operate a full humanoid.

    Manufacturer's instructions ↗
03 / PRACTICAL QUESTIONS

Submodules, manufacturing files and license differences

Answers are based on published source material and project documentation. Their order does not represent search volume.

01Why are folders empty after I clone K-Bot?

Core K-Bot software is stored in git submodules. Use a recursive clone or git submodule update --init --recursive at the selected revision.

Sources Official project source ↗

02Are K-Bot STL files complete for a self-build?

The repository has mechanical assets, but its public-alpha status means a complete fabrication-ready package cannot be assumed. Inspect each release and the required purchased hardware.

Sources Official project source ↗

03Which project runs the simulator and which runs the robot?

The root index identifies ksim-kbot for simulation, kos-kbot for the robot platform and kbot-inference as another submodule. Use the version pinned by the root.

Sources Official project source ↗

04What software license applies?

The README says GPL v3 for software and CERN-OHL-S for hardware, but individual license files and modules should be checked if their text differs.

Sources Official project source ↗

05Can I use the latest master of every submodule?

The README describes how to update submodules, but doing so may create mismatched versions. For a reproducible build, use the pinned commit identifiers first.

Sources Official project source ↗

06Is this a stable commercial humanoid design?

The maintainers label the project public alpha and explicitly warn that breaking changes should be expected.

Sources Official project source ↗

04 / ENGINEERING NOTES

What to check before building K-Bot

Build and integration

Clone recursively and pin submodule revisions before attempting a build. Review the individual subprojects and their setup instructions; a master checkout without submodule contents may leave required source files unavailable.

Known constraints

The repository is public alpha. Its README says GPL-3.0 for software, while the checked LICENSE file contains MIT text. Check individual modules and ask the maintainer to clarify before reuse.

05 / SOURCES

Original documentation

  1. Official project source
  2. MIT text in the repository LICENSE file
  3. Hardware CERN-OHL-S license file
  4. Official project source
  5. K-Bot electrical and board resources

Found a changed specification? Submit a correction with its source ↗

← Back to the open-source index